Quality & Delivery
We build and accept every order against your approved sample, tech pack, size chart and order requirements. Final inspection, batch traceability and packing checks are how we keep the quality and delivery risk of a made-to-order programme down.
01 — Standards and inspection
Every finished garment goes through final inspection covering workmanship, measurements, stains, colour matching, trims, labels and packing. Your own QC team or an independent inspector may also run random AQL sampling at the inspection level and AQL limits written into the order.
Each inspected piece carries an inspector code on its poly bag. That code traces the piece back to the inspection record and the production batch it came from, which is what makes a claim discussable months after delivery instead of a matter of memory.
Stitching, seams, hems and trims against the approved construction.
Against your size chart and the measurement tolerances in the order.
Against the approved sample and the confirmed colour standard.
Main label, care label, hangtag, barcode and buyer-supplied trims.
Individual packing, size ratio and carton marks before the carton is closed.
02 — Responsibility and tolerances
Responsibility is split in writing before bulk starts, so neither side has to argue about it after the goods arrive.
We take responsibility for
Staining, holes and open seams caused in our production, inspection or packing, and colour fastness or shrinkage after washing that fails to meet the standard both sides confirmed.
Confirmed with you before production
Dyeing, printing and order quantity carry normal production tolerances. The colour standard, the print standard and the quantity tolerance are confirmed with you in writing before production begins.
Written before bulk
The dye lot, the colour standard and the print placement and colour standard are agreed in writing, so a shade or placement question is answered against a document rather than an opinion.
Written before bulk
The quantity tolerance per style and colour is agreed in writing before production. Short or over shipments inside that tolerance are not treated as a defect.
03 — Claims and response
Send the problem description, the order and batch information, the affected quantity and photos. For issues that only testing can reveal, such as shrinkage or colour bleeding, a claim can be raised up to 60 days after you receive the goods.
| Step | What happens | Timing |
|---|---|---|
| 1. Claim raised | You send the problem description, order and batch details, affected quantity and photos of the goods as received. | Agreed deadline, or up to 60 days for test-revealed issues |
| 2. Acknowledged | We confirm in writing that the claim has been received and name the person handling it. | Within 2 business days |
| 3. Initial findings | Once your documents are complete we return an initial investigation result, including whether the batch record supports the claim. | Within 5 business days |
| 4. Resolution agreed | Where the issue is ours, we agree a remedy with you: rework, replacement, discount or refund, plus the reasonable direct handling costs confirmed in writing. | Case by case, in writing |
Every claim is answered against the approved sample, the tech pack, the size chart and the batch inspection record, which is why the inspector code on the poly bag matters as much as the photos.
04 — Packing and delivery
Before shipment we check the goods against the order and prepare the documents your forwarder and your buyer will ask for. Nothing is loaded until the carton marks, the size ratio and the document set match what was agreed for that order.
Per style, per colour and per size, against the order sheet.
Main label, care label, hangtag and buyer barcode in the agreed position.
Poly bag, size sticker, inspector code and any insert the order calls for.
Shipping marks, carton numbering and carton dimensions against the packing spec.
Packing list, commercial invoice and the other documents agreed for the order.
Questions
Workmanship, measurements, stains, colour matching, trims, labels and packing. Every finished garment is checked before it is packed.
Yes. Your team or an independent inspector can run AQL sampling at the inspection level and AQL limits written into the order.
Stains, holes and open seams caused in production, inspection or packing, and colour fastness or shrinkage after washing that misses the standard both sides confirmed. Dyeing, printing and quantity tolerances confirmed in writing before production are not defects.
Visible issues follow the deadline agreed in the order. Issues that only testing can reveal, such as shrinkage or colour bleeding, can be claimed up to 60 days after you receive the goods.
We acknowledge receipt within 2 business days and return initial findings within 5 business days once your documents are complete. Where the issue is ours, the remedy is rework, replacement, discount or refund agreed case by case, plus the reasonable direct handling costs confirmed in writing.
Tell us the style, the quantity and the destination market. We will come back with the inspection level, the tolerance sheet and the packing spec for your order.
Contact us →